SFP-759-EML
Load Rating (Single Axis): 2,500 lbs
Load Rating (Dual Axis): 1,800 lbs (see dimensional drawing sheets 11-14 for load curves)
Swing Radius (Single Axis): 44.0-52.5”
Swing Radius (Dual Axis): 58.5”
Max Torque (Primary Axis): 7,500 in-lbs
Easy Crank (Primary Axis): 2,000-7,200 in-lbs
To receive a CAD model or a quotation:
Product Features
- Safety Factor: 3 for Yield & 5 for Ultimate
- Rated Load Capacity:
- Dynamic, 0″ to 3″ eccentricity: 2,500 lbs. (1,134 kg.)
- Operating Temperature:
+32 to +104 °F (0 to +40 °C).
- Contact factory for special applications with extended operating temperatures.
- Main Beam Ball Lock Pin: Reliably prevents End Frames from slipping on Main Beams
- Materials: Steel construction
- Axial Float & Sleeve Bearing in Non-Gearbox Side Trunnion: The non-gearbox side trunnion has one inch of axial float to ease payload integration as well as a needle roller bearings to increase bearing life and reduce friction.
- NOTE: A smaller than standard swing radius may be recommended for some applications. See the “Holding Fixture Safety” section in Documentation concerning section 4. Unexpected Accident Loads. referring to “Maximum Recommended Swing Radius “.
Standard Configuration (For additional options click on “Configure a Flotron Fixture” button above or view dimensional drawing for detailed information)
- Finishes: Class 10k (ISO 7 cleanroom compabible finishes) – Flotron blue powder coated end frames, gearbox painted Flotron blue, nickel plated components (no zinc) stainless steel or black oxide fasteners and mis. hardware. Standard lubricants
- Main Beam: Single beam that connects the end frames.
- Gearbox: 60:1 ratio gearbox with a 12" diameter crank.
- Trunnion Interface/Mount/Clamp Options:
- P12 Mounting Plate (8” x 12”) with a standard mounting hole pattern.
- Choice of Interface "B" distance: : Distance between interfaces. See dimensional drawing for how angle interface distances are measured if angle interface is chosen
- Casters: Ø6″ x 3″ wide Nylon wheels, king-pin-less swivel bearings, brakes, and swivel locks.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For 700 Series - Creating a Model Number pdf click here
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.