Dual Support / 800 Series

SFP-800 Series

Flotron’s Small Foot Print (SFP) 800 series Rotation Fixtures are a higher capacity, more compact version of the 800 series where floor space is a premium. The SFP-800 series includes additional features and options; lift points above the CG capable of lifting the Flotron (with the payload integrated), one inch of axial float on the non-gearbox side trunnion to ease payload integration, flat leg design to lower the rotation centerline height without sacrificing available payload swing radius, lighter weight to ease maneuverability, elimination of single failure points for launch site compatibility, PTFE composite sleeve bushings on the non-gearbox-side trunnion to eliminate exposed grease in this area, as well as an option for a cordless hand drill to rotate the gearbox. This series is offered in three standard single beam configurations with adjustable riser heights. They are supplied with heavy-duty, hollow shaft, stairstep resistant gearboxes to handle large, off-center loads which may occur during assembly of the mounted payload. See below for comparative data on the different SFP-800 series models and click on any image for additional information.

SFP-847

Load Rating: 3,200 lbs
Swing Radius: 26-32”
Max Torque: 12,000 in-lbs
Easy Crank: 2,000 - 12,000 in-lbs

SFP-853

Load Rating: 3,200 lbs
Swing Radius: 32-42”
Max Torque: 12,000 in-lbs
Easy Crank: 2,000 - 12,000 in-lbs

SFP-862

Load Rating: 3,200 lbs
Swing Radius: 42-54”
Max Torque: 12,000 in-lbs
Easy Crank: 2,000 - 12,000 in-lbs

800 Series

Flotron’s 800 series holding fixtures are large, high load capacity standard off-the-shelf units. They have roughly twice the load and torque capacity of the 700 series and are offered in three standard single beam configurations with adjustable riser heights. They are supplied with heavy-duty stairstep resistant gearboxes to handle large, off-center loads which may occur during assembly of the mounted payload. These models are especially suited for large, heavy assemblies. See below for comparative data on the different 800 series models and click on any image for additional information about a particular fixture.

848

Load Rating: 2,600 lbs
Swing Radius: 33.7”
Max Torque: 9,400 in-lbs
Easy Crank: 5,100 in-lbs

860

Load Rating: 2,200 lbs
Swing Radius: 43.7”
Max Torque: 9,400 in-lbs
Easy Crank: 5,100 in-lbs

872

Load Rating: 1,900 lbs
Swing Radius: 57.7”
Max Torque: 9,400 in-lbs
Easy Crank: 5,100 in-lbs