HD310
Load Rating: 80 lbs
Swing Radius: 31.2"
Max Torque: N/A
Easy Crank: N/A
The Model HD310-1023-TB-5 shown below is typical and representative of the HD310 Models.
To receive a CAD model or a quotation:
The maximum distance between mounting interfaces is directly related to the main beam length. Specify the distance between mounting interfaces to be at or slightly larger than the length of the part-to-be-handled. The fixture can be adjusted to accommodate smaller length parts, however, the main beam(s) extending from each end frame may be inconvenient. For more information see the 300 SERIES OPTIONS page and 300 SERIES CREATING A MODEL NUMBER pdf.
Addition of an optional index plate decreases the vertical adjustment from 12" to 8" and increases the minimum trunnion height from 33.1" to 37.1".
Product Features
- Safety Factor: 2 for Yield & 3 for Ultimate
- Rated Load Capacity:
- Dynamic, 0″ eccentricity: 80 lbs. (36 kg.)
- Dynamic, 5″ eccentricity: NA
- Operating Temperature:
+32 to +104 °F (0 to +40 °C)
- Contact factory for special applications with extended operating temperatures.
- Trunnion Interface/Mount/Clamp Options:
- Angle Interface
- Mounting Plate Interface
- Board Clamp Interface
- Materials: Steel construction
- Finish: Flotron Blue powder coat, with selected parts zinc plated.
- Choice of Main Beam Length
- Trunnion Brake Knob
- Optional Main Beam Lengths or Telescopic Main Beams
- Optional Trunnion Interface/Mount/Clamp
- Optional Index Plate
- Optional Casters
- Optional finishes for clean room capability
- Optional Ground Lug for use in electrostatically protected areas (EPA’s)
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For 300 Series - Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.