848

Load Rating: 2,600 lbs

Swing Radius: 33.7"

Max Torque: 9,400 in-lbs

Easy Crank: 5,100 in-lbs

The Model 848-J5-IND15-P12/A30-B074 shown is typical and representative of the 848 Models.

To receive a CAD model or a quotation:

The maximum distance between mounting interfaces is directly related to the main beam length. Specify the distance between mounting interfaces to be at or slightly larger than the length of the part-to-be-handled. The fixture can be adjusted to accommodate smaller length parts, however, the main beam(s) extending from each end frame may be inconvenient. For more information see the 800 SERIES OPTIONS page and 800 SERIES CREATING A MODEL NUMBER pdf.
A smaller than standard swing radius may be recommended for some applications. See the "Technical Section" under "Holding Fixture Safety" on page 3 of 7 concerning "Unexpected Accident Loads" and the chart on page 4 of 7 referring to "Maximum Recommended Swing Radius"

Product Features

  • Safety Factor: 3
  • Rated Load Capacity:
    • Dynamic, 0″ to 3.5″ eccentricity: 2,600 lbs. (1,179 kg.)
    • Dynamic, 10″ eccentricity: 940 lbs. (426 kg.)
  • Operating Temperature: +32 to +104 °F (0 to +40 °C)
    • Contact factory for special applications with extended operating temperatures.
  • Materials: Steel construction
  • Finish: Flotron Blue powder coat with selected parts zinc plated.
  • Gearbox: Low backlash, non-backdriving stairstep resistant design with 250:1 ratio and 8″ diameter crank
  • Choice of Main Beam Length
  • Casters: 8″ diameter x 3″ wide wheel with polyurethane tread, kingpinless swivel bearing, Tread Lock brake and swivel lock
  • Index Plate: Standard with 15° index plate and index stops
  • Self Aligning Couplings: These zero backlash couplings allow about ½ degree misalignment between load and fixture.
  • Main Beam Ball Lock Pins: Reliably prevents End Frames from slipping on Main Beams
  • Combination Mounting Plate / Angle Interface
  • Gearbox Hub: The zero backlash gearbox hub attaches the gearbox shaft to the index plate and mounting interface. The hub is designed to withstand both torque and overhung loads.
  • A smaller than standard swing radius may be recommended for some applications. See the “Technical Section” under “Holding Fixture Safety” on page 3 of 7 concerning “Unexpected Accident Loads” and the chart on page 4 of 7 referring to “Maximum Recommended Swing Radius“.
  • Optional Main Beam lengths
  • Optional Leveling Jacks
  • Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA’s)

As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.

For 800 Series - Creating a Model Number pdf click here.

For clarification of terms or phrases, please see the Holding Fixtures Definitions page.