SFP-747-EML

Product Features

• Safety Factor: 3 for Yield & 5 for Ultimate
• Rated Load Capacity:
  • Dynamic, 0″ to 3.75″ eccentricity: 3,200 lbs. (1,455 kg.)
• Operating Temperature: +32 to +104 °F (0 to +40 °C).
  • Contact factory for special applications with extended operating temperatures.
• Main Beam Ball Lock Pin: Reliably prevents End Frames from slipping on Main Beams
• Materials: Steel construction
• Axial Float & Sleeve Bearing in Non-Gearbox Side Trunnion: The non-gearbox side trunnion has one inch of axial float to ease payload integration as well as needle roller bearings to increase bearing life and reduce friction.
• NOTE: A smaller than standard swing radius may be recommended for some applications. See the “Holding Fixture Safety” section in Documentation concerning section 4 unexpected accident loads referring to “Maximum Recommended Swing Radius “.

Standard Configuration (For additional options click on “Configure a Flotron Fixture” button above or view dimensional drawing for detailed information)

• Finishes: Class 10k (ISO 7 cleanroom compabible finishes) – Flotron blue powder coated end frames, gearbox painted Flotron blue, nickel plated components (no zinc) stainless steel or black oxide fasteners and mis. hardware. Standard lubricants.
• Main Beam: Single beam that connects the end frames.
• Gearbox: Low backlash, non-back-driving, stair-step resistant, hollow shaft design with 60:1 ratio and 12″ diameter hand crank
• Trunnion Interface/Mount/Clamp Options:
  • P12 Mounting Plate (8” x 12”) with a standard mounting hole pattern.
• Choice of Interface "B" distance: Distance between interfaces. See dimensional drawing for how angle interface distances are measured if angle interface is chosen.
• Casters: Ø6″ x 3″ wide Nylon wheels, king-pin-less swivel bearings, brakes, and swivel locks.

As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.

For 700 Series - Creating a Model Number pdf click here

For clarification of terms or phrases, please see the Holding Fixtures Definitions page.