Dual Support / Off-The-Shelf / SFP-800 Series / SFP-847

SFP-847

Load Rating: 3,200 lbs

Swing Radius: 26-32”

Max Torque: 12,000 in-lbs

Easy Crank: 2,000 - 12,000 in-lbs

The Model SFP-847-J0-P1-INDS15-P12-T3 shown is typical and representative of the SFP-847 Models.

To receive a CAD model or a quotation:

Configure a Flotron Fixture
The maximum distance between mounting interfaces is directly related to the main beam length. Specify the distance between mounting interfaces to be at or slightly longer than the length of the payload. The end frames can be adjusted inward to accommodate shorter length payloads, however the main beam(s) protruding beyond the end frames may result in a trip hazard. For more information see the SFP-800 SERIES OPTIONS page and SFP-800 SERIES CREATING A MODEL NUMBER pdf.
A shorter than standard swing radius may be recommended for some applications.  See the “Technical Section” under “Holding Fixture Safety” on page 3 of 7 concerning “Unexpected Accident Loads” and the chart on page 4 of 7 referring to “Maximum Recommended Swing Radius”.

Product Features

  • Safety Factor: 3 for Yield & 5 for Ultimate
  • Rated Load Capacity:
    • Dynamic, 0″ to 3.75″ eccentricity: 3,200 lbs. (1,455 kg.)
  • Operating Temperature: +32 to +104 °F (0 to +40 °C).
    • Contact factory for special applications with extended operating temperatures.
  • Main Beam Ball Lock Pin: Reliably prevents End Frames from slipping on Main Beam
  • Materials: Steel construction
  • Axial Float & Sleeve Bearing in Non-Gearbox Side Trunnion: The non-gearbox side trunnion has one inch of axial float to ease payload integration as well as needle roller bearings to increase bearing life and reduce friction.
  • NOTE: A smaller than standard swing radius may be recommended for some applications. See the “Holding Fixture Safety” section in Documentation concerning section 4 unexpected accident loads referring to “Maximum Recommended Swing Radius “.

 

Standard Configuration (For additional options click on “Configure a Flotron Fixture” button above or view dimensional drawing for detailed information)

  • Finishes: Class 10k (ISO 7 cleanroom compatible finishes) – Flotron blue powder coated end frames, gearbox painted Flotron blue, nickel plated components (no zinc) stainless steel or black oxide fasteners and mis. hardware. Standard lubricants.
  • Main Beam: Single beam that connects the end frames.
  • Gearbox: Low backlash, non-back-driving, stair-step resistant, hollow shaft design with 60:1 ratio and 12″ diameter hand crank
  • Trunnion Interface/Mount/Clamp Options:
    • P12 Mounting Plate (8” x 12”) with a standard mounting hole pattern
  • Choice of Interface "B" distance: Distance between interfaces. See dimensional drawing for how angle interface distances are measured if angle interface is chosen.
  • Casters: Ø6″ x 3″ wide Nylon wheels, kingpinless swivel bearings, brakes, and swivel locks.
View SFP-800 Series Options

As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.

For SFP-800 Series - Creating a Model Number pdf click here.

For clarification of terms or phrases, please see the Holding Fixtures Definitions page.