Load Rating: 500 lbs

Swing Radius: 39.0"

Max Torque: 1,275 in-lbs

Easy Crank: 700 in-lbs

To receive a CAD model or a quotation:

Product Features

  • Safety Factor: Sfy = 2 and SFu=3
  • Rated Load Capacity:
    • Dynamic, 0″ eccentricity: 500 lbs. (227 Kg.)
    • Dynamic, 5″ eccentricity: 255 lbs. (116 Kg.)
  • Operating Temperature: '+32°F to +104°F (0°C to +40°C)
    • Contact factory for special applications with extended operating temperatures.
  • Main Beam Ball Lock Pin: Secures position of end frames to main beam once the payload interface distance has been set.
  • Materials: Steel construction
  • Trunnion Brake Knob: A smaller than standard swing radius may be recommended for some applications. See the “Technical Section” under “Holding Fixture Safety” on page 3 of 7 concerning “Unexpected Accident Loads” and the chart on page 4 of 7 referring to “Maximum Recommended Swing Radius”


Standard Configuration (For additional options click on “Configure a Flotron Fixture” button above or view dimensional drawing for detailed information)

  • Finishes: Flotron blue powder coated end frames; Gearbox painted Flotron blue; Zinc plated or black oxide fasteners, misc. hardware, and components; Standard lubricants.
  • Main Beam: Single beam that connects the end frames.
  • Gearbox: 50:1 ratio gearbox with a 6" diameter crank.
  • Trunnion Interface/Mount/Clamp Options:
    • Multiple interface choices available.
  • Trunnion Bearings: Steel on Steel trunnion bearing. Ideal for shorter payloads that are rigid.
  • Choice of Interface "B" distance: Distance between interfaces. See dimensional drawing for how angle interface distances are measured if angle interface is chosen.
  • Casters: 5" diameter X 2" wide polyurethane wheels with swivel bearing and brake.

As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.

For 600 Series - Creating a Model Number pdf click here

For clarification of terms or phrases, please see the Holding Fixtures Definitions page.