XD739-EML

Load Rating: 1,300 lbs

Swing Radius: 22” - 28”

Height Range: 32.75” – 38.75”

Max Torque: 5,400 in-lbs

Easy Crank: 2,000 in-lbs

To receive a CAD model or a quotation:

Product Features

  • Safety Factor: SFy=3 and SFu=5
  • Rated Load Capacity:
    • 1,300 lbs. (590 kg) considering a simultaneous 1/2G side load (worst case direction), and a 1G vertical load.
    • Max torque on gearbox 5,400 in-lbs. (2,000 in-lbs. max easy crank).
  • Operating Temperature: +41°F to +104°F (5°C to +40°C)
  • Main Beam Ball Lock Pin: Secures position of end frames to main beam once the payload interface distance has been set.
  • Materials: Steel Construction.
  • Synchronized electromechanically controlled risers: The synchronized risers can adjust the height of the payload when it is attached to the trunnion interfaces. Pushing the up or down arrow on the control button causes the risers to raise or lower in unison. Unit will not lose position or need to be re-homed when powered off.
  • 360° part rotation: The part can be rotated 360° to place the area to be worked on in an ergonomic location.
  • Raise/Lower speed: 11.5 inches per minute (approximately 31 seconds to lift 6")

 

Standard Configuration (For additional options click on “Configure a Flotron Fixture” button above or view dimensional drawing for detailed information)

  • Finishes: Flotron blue powder coated end frames; Gearbox painted Flotron blue; Zinc plated or black oxide fasteners, misc. hardware, and components; Standard lubricants.
  • Main Beam: Single beam that connects the end frames.
  • Gearbox: 60:1 ratio gearbox with a 12" diameter crank.
  • Trunnion Interface/Mount/Clamp Options:
    • Multiple interface choices available.
  • Trunnion Bearings: Steel on Steel trunnion bearing. Ideal for shorter payloads that are rigid.
  • Choice of Interface "B" distance: Distance between interfaces. See proposal drawing for how angle interface distances are measured if angle interface is chosen.
  • Casters: 5" diameter X 2" wide polyurethane wheels with swivel bearing and brake.

As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.

For 700 Series - Creating a Model Number pdf click here.

For clarification of terms or phrases, please see the Holding Fixtures Definitions page.