![](https://flotron.com/wp-content/uploads/2020/08/CIR-AH_11-28-2022-with-chen-final1.jpg)
Archives
![](https://flotron.com/wp-content/uploads/2020/08/CIR-AH_11-28-2022-with-chen-final1.jpg)
![](https://flotron.com/wp-content/uploads/2018/04/CTL-129-SA-With-Mei-1.jpg)
CTL129
CRF129 Data Sheet
The Model CTL-C-129‐P56‐C10‐J1‐T1 shown below is typical and representative of the CTL129 Models. For more information on specifying a cantilevered rotation fixture, see the MID-SIZED SATELLITE FIXTURE OPTIONS page and MID-SIZED SATELLITE FIXTURE CREATING A MODEL NUMBER pdf.
Product Features:
- Safety Factors: 3 for Yield & 5 for Ultimate
- Primary Axis Rated Load Capacity: 12,000 lbs. with CG located at 90” from interface plate and 6” from primary axis rotation centerline.
- Optional Secondary Axis Rated Load Capacity: 7,000 lbs. with CG located at 110” from interface plate and 8” from secondary axis rotation centerline.
- Operating Temperature: +32 to +104 °F (0 to +40 °C). Contact factory for special applications with extended operating temperatures.
- Payload Interface: Ø56” Circular Interface Plate with 36X through holes for 5/8” fasteners on Ø48” bolt circle.
- Primary & Secondary Axis Gearbox/Slewing Ring: 3,204:1 total reduction. Inputs can be driven with a hand drill or 12″ diameter hand crank.
- Casters: Heavy duty 10″ diameter x 3.25″ wide nylatron wheel, sealed bearings, swivel lock, brake, and steering bar receptacles. (Ø12” diameter optional)
- Materials: Steel and aluminum construction.
- Finish: Clean room compatible finishes standard. Sky white powder coated frames; gearbox painted gloss white epoxy; nickel plated, black oxide or stainless-steel fasteners and miscellaneous hardware (no zinc).
- Optional Index Plate.
- Optional Casters.
- Optional Leveling Jacks.
- Optional Lubricants.
- Optional Tow Bar.
- Optional Secondary Axis of Rotation Structure
- Optional Standard Proof Load Test
- For more about Mid-Size Satellite Fixture Options click here.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Mid-Size Satellite Fixtures – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
![](https://flotron.com/wp-content/uploads/2018/04/CRF-60-8-31-2023-final-with-debra270.png)
CRF 60
CRF 60 Data Sheet
The Model CRF-60‐P12‐C6 shown below is typical and representative of the CRF 60 Models. For more information on specifying a cantilevered rotation fixture, see the CANTILEVERED ROTATION FIXTURE page and CANTILEVERED ROTATION FIXTURE CREATING A MODEL NUMBER pdf.
Product Features:
- Safety Factors: 3 for Yield & 5 for Ultimate
- Rated Load Capacity: 1,000 lbs. with CG located at 30” from interface plate and 2” from primary axis rotation centerline.
- Operating Temperature: +32 to +104 °F (0 to +40 °C). Contact factory for special applications with extended operating temperatures.
- Payload Interface: Ø12” Circular Interface Plate with 12X through holes for 1/2” fasteners on Ø10” bolt circle.
- Gearbox: 60:1ratio with 12” diameter crank.
- Casters: Heavy duty 6″ diameter x 3″ wide phenolic tread, sealed bearings, swivel lock, brake, and steering bar receptacles. (Ø12” diameter optional)
- Materials: Steel construction.
- Finish: Flotron Blue powder coat with selected parts zinc plated.
- Optional Casters.
- Optional Lubricants.
- Optional Tow Bar.
- Optional finishes for clean room compatibility.
- Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA’s).
- Optional Standard Proof Load Test
- For more about Cantilevered Rotation Fixture Options click here.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Cantilevered Rotation Fixtures – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
![](https://flotron.com/wp-content/uploads/2018/04/CRF-48-8-31-2023-final-with-debra270-1.png)
CRF 48
CRF 48 Data Sheet
The Model CRF-48‐P12‐C6 shown below is typical and representative of the CTL48 Models. For more information on specifying a cantilevered rotation fixture, see the CANTILEVERED ROTATION FIXTURE page and CANTILEVERED ROTATION FIXTURE CREATING A MODEL NUMBER pdf.
Product Features:
- Safety Factors: 3 for Yield & 5 for Ultimate
- Rated Load Capacity: 1,000 lbs. with CG located at 30” from interface plate and 2” from primary axis rotation centerline.
- Operating Temperature: +32 to +104 °F (0 to +40 °C). Contact factory for special applications with extended operating temperatures.
- Payload Interface: Ø12” Circular Interface Plate with 12X through holes for 1/2” fasteners on Ø10” bolt circle.
- Gearbox: 60:1ratio with 12” diameter crank.
- Casters: Heavy duty 6″ diameter x 3″ wide phenolic tread, sealed bearings, swivel lock, brake, and steering bar receptacles. (Ø12” diameter optional)
- Materials: Steel construction.
- Finish: Flotron Blue powder coat with selected parts zinc plated.
- Optional Casters.
- Optional Lubricants.
- Optional Tow Bar.
- Optional finishes for clean room compatibility.
- Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA’s).
- Optional Standard Proof Load Test
- For more about Cantilevered Rotation Fixture Options click here.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Cantilevered Rotation Fixtures – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
![](https://flotron.com/wp-content/uploads/2018/04/CRF-36-8-18-2023270.png)
CRF 36
CRF 36 Data Sheet
The Model CRF-36‐P12‐C6 shown below is typical and representative of the CTL 36 Models. For more information on specifying a cantilevered rotation fixture, see the CANTILEVERED ROTATION FIXTURE page and CANTILEVERED ROTATION FIXTURE CREATING A MODEL NUMBER pdf.
Product Features:
- Safety Factors: 3 for Yield & 5 for Ultimate
- Rated Load Capacity: 1,000 lbs. with CG located at 30” from interface plate and 2” from primary axis rotation centerline.
- Operating Temperature: +32 to +104 °F (0 to +40 °C). Contact factory for special applications with extended operating temperatures.
- Payload Interface: Ø12” Circular Interface Plate with 12X through holes for 1/2” fasteners on Ø10” bolt circle.
- Gearbox: 60:1ratio with 12” diameter crank.
- Casters: Heavy duty 6″ diameter x 3″ wide phenolic tread, sealed bearings, swivel lock, brake, and steering bar receptacles. (Ø12” diameter optional)
- Materials: Steel construction.
- Finish: Flotron Blue powder coat with selected parts zinc plated.
- Optional Casters.
- Optional Lubricants.
- Optional Tow Bar.
- Optional finishes for clean room compatibility.
- Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA’s).
- Optional Standard Proof Load Test.
- For more about Cantilevered Rotation Fixture Options click here.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Cantilevered Rotation Fixtures – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
![](https://flotron.com/wp-content/uploads/2018/01/CTL-AH-With-Richard-1.jpg)
CTL-AH
CTL-AH Data Sheet
The Model CTL‐AH‐P24‐C6‐T1‐BX shown below is typical and representative of the CTL‐AH Models. For more information on specifying a cantilevered rotation fixture, see the SMALL SATELLITE FIXTURE OPTIONS page and SMALL SATELLITE FIXTURE CREATING A MODEL NUMBER pdf.
Product Features:
- Safety Factor: 3
- Rated Load Capacity: 3,000 lbs with CG located at 30” from interface plate and 2.7” from rotation centerline.
- Lift Range: 30”‐60” from floor to center of rotation.
- Operating Temperature: +32 to +104 °F (0 to +40 °C). Contact factory for special applications with extended operating temperatures.
- Payload Interface: Ø24” Circular Interface Plate with 20X through holes for 1⁄2” fasteners on Ø22” bolt circle.
- Gearbox: 175:1 ratio with 8′′ diameter crank.
- Slewing Ring: 3.6:1 ratio.
- Rack and Pinion Jack: 5.64 turns per inch lift.
- Casters: Heavy duty 6′′ diameter x 3′′ wide wheel with phenolic tread, sealed swivel bearing. Tech‐lock brake and swivel locks. (8” diameter optional).
- Materials: Steel and aluminum construction.
- Finish: Flotron Blue powder coat with selected parts zinc plated.
- Optional Index Plate.
- Optional Casters.
- Optional Tow Bar.
- Optional Tool Box.
- Optional finishes for clean room compatibility.
- Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA’s).
- For more about Small Satellite Fixture Options click here.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Small Satellite Fixture – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
![](https://flotron.com/wp-content/uploads/2017/09/CTL-36-With-Richard-1.jpg)
CTL36
CTL36 Data Sheet
The Model CTL36‐P24‐C6‐T1‐BX shown below is typical and representative of the CTL36 Models. For more information on specifying a cantilevered rotation fixture, see the SMALL SATELLITE FIXTURE OPTIONS page and SMALL SATELLITE FIXTURE CREATING A MODEL NUMBER pdf.
Product Features:
- Safety Factor: 3
- Rated Load Capacity: 3,000 lbs with CG located at 30” from interface plate and 2.6” from rotation centerline.
- Operating Temperature: +32 to +104 °F (0 to +40 °C). Contact factory for special applications with extended operating temperatures.
- Trunnion Interface/Mount/Clamp Options: Ø24” Circular Interface Plate with 20X through holes for ½” fasteners on Ø22” bolt circle.
- Gearbox: 60:1 ratio with 12″ diameter crank.
- Casters: Heavy duty 6″ diameter x 3″ wide wheel with phenolic tread, sealed swivel bearing. Tech‐lock brake and swivel locks.
- Materials: Steel construction.
- Finish: Flotron Blue powder coat with selected parts zinc plated.
- Optional Index Plate.
- Optional Casters.
- Optional Tow Bar.
- Optional Tool Box.
- Optional finishes for clean room compatibility.
- Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA’s).
- For more about Small Satellite Fixture Options click here.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Small Satellite Fixture – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
![](https://flotron.com/wp-content/uploads/2017/09/CTL-48-With-Richard-1.jpg)
CTL48
CTL48 Data Sheet
The Model CTL48‐P24‐C6‐T1‐BX shown below is typical and representative of the CTL48 Models. For more information on specifying a cantilevered rotation fixture, see the SMALL SATELLITE FIXTURE OPTIONS page and SMALL SATELLITE FIXTURE CREATING A MODEL NUMBER pdf.
Product Features:
- Safety Factor: 3
- Rated Load Capacity: 2,600 lbs with CG located at 30” from interface plate and 3.0” from rotation centerline.
- Operating Temperature: +32 to +104 °F (0 to +40 °C). Contact factory for special applications with extended operating temperatures.
- Trunnion Interface/Mount/Clamp Options: Ø24” Circular Interface Plate with 20X through holes for ½” fasteners on Ø22” bolt circle.
- Gearbox: 60:1 ratio with 12″ diameter crank.
- Casters: Heavy duty 6″ diameter x 3″ wide wheel with phenolic tread, sealed swivel bearing. Tech‐lock brake and swivel locks.
- Materials: Steel construction.
- Finish: Flotron Blue powder coat with selected parts zinc plated.
- Optional Index Plate.
- Optional Casters.
- Optional Tow Bar.
- Optional Tool Box.
- Optional finishes for clean room compatibility.
- Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA’s).
- For more about Small Satellite Fixture Options click here.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Small Satellite Fixture – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
![](https://flotron.com/wp-content/uploads/2017/09/CTL-60-With-Richard-1.jpg)
CTL60
CTL60 Data Sheet
The Model CTL60‐P24‐C6‐T1‐BX shown below is typical and representative of the CTL60 Models. For more information on specifying a cantilevered rotation fixture, see the SMALL SATELLITE FIXTURE OPTIONS page and SMALL SATELLITE FIXTURE CREATING A MODEL NUMBER pdf.
Product Features:
- Safety Factor: 3
- Rated Load Capacity: 2,200 lbs with CG located at 30” from interface plate and 3.6” from rotation centerline.
- Operating Temperature: +32 to +104 °F (0 to +40 °C). Contact factory for special applications with extended operating temperatures.
- Trunnion Interface/Mount/Clamp Options: Ø24” Circular Interface Plate with 20X through holes for ½” fasteners on Ø22” bolt circle.
- Gearbox: 60:1 ratio with 12″ diameter crank.
- Casters: Heavy duty 6″ diameter x 3″ wide wheel with phenolic tread, sealed swivel bearing. Tech‐lock brake and swivel locks.
- Materials: Steel construction.
- Finish: Flotron Blue powder coat with selected parts zinc plated.
- Optional Index Plate.
- Optional Casters.
- Optional Tow Bar.
- Optional Tool Box.
- Optional finishes for clean room compatibility.
- Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA’s).
- For more about Small Satellite Fixture Options click here.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Small Satellite Fixture – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.