CJ-6000 Data Sheet
The Model CJ-6000 shown below is typical and representative of the CJ-6000 Models. For more information on specifying a jack, see the JACK OPTIONS page and JACK CREATING A MODEL NUMBER pdf..
Click on Caster Jack image for an Interactive experience
[dcb name=styling-click-for-experience-text]
Product Features:
- Safety Factors: SFy=3 and SFu=5
- Rated Load Capacity: Simultaneous 6,000 lbs. (2,721 kg.) vertical load and 3,000 lb (1,361 kg.) side load in any direction.
- Operating Temperature: +32° to +104°F (0 to +40 °C). Contact Flotron for special applications with extended operating temperatures.
- Hand Crank: 12″ long removable crank to reveal a 1/2″ square drive input. When the handle is removed, the jack can be raised/lowered with a standard hand drill (300 rpm max non-impact)
- Input Clutch: Pre-set at Flotron to prevent damage to jack the at end the of travel.
- Turns per inch lift: 50 turns of handle per inch lift of jack.
- Materials: Steel and aluminum construction. Stainless steel fasteners. Bronze nut.
- Finish: Steel and Aluminum parts nickel plated. Caster body powder coated with zinc plated hardware. For additional caster finish options, click here
- Lubricants: Synco super lube grease standard on screw threads. General purpose bearing grease standard in caster swivel bearing. All other bearings or gears are either self-lubricating or sealed. For additional lubricant options, click here
All data presented is based on no modifications to the product.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Jack – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
CJ-3250 Data Sheet
The Model CJ-3250 shown below is typical and representative of the CJ-3250 Models. For more information on specifying a jack, see the JACK OPTIONS page and JACK CREATING A MODEL NUMBER pdf.
Click on Caster Jack image for an Interactive experience
[dcb name=styling-click-for-experience-text]
Product Features:
- Safety Factors: SFy=3 and SFu=5
- Rated Load Capacity: Simultaneous 3,250 lbs. (1,474 kg.) vertical load and 1,625 lb (737 kg.) side load in any direction.
- Operating Temperature: +32° to +104°F (0 to +40 °C). Contact Flotron for special applications with extended operating temperatures.
- Hand Crank: 10″ long removable crank to reveal a 3/8″ square drive input. When the handle is removed, the jack can be raised/lowered with a standard hand drill (300 rpm max non-impact)
- Input Clutch: Pre-set at Flotron to prevent damage to the jack at the end of travel.
- Turns per inch lift: 20 turns of handle per inch lift of jack.
- Materials: Steel and aluminum construction. Stainless steel fasteners. Bronze nut.
- Finish: Steel and Aluminum parts nickel plated. Caster body powder coated with zinc plated hardware. For additional caster finish options, click here
- Lubricants: Synco super lube grease standard on screw threads. General purpose bearing grease standard in caster swivel bearing. All other bearings or gears are either self-lubricating or sealed. For additional lubricant options, click here
All data presented is based on no modifications to the product.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Jack – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
CJ-2500 Data Sheet
The Model CJ-2500 shown below is typical and representative of the CJ-2500 Models. For more information on specifying a jack, see the JACK OPTIONS page and JACK CREATING A MODEL NUMBER pdf.
Click on Caster Jack image for an Interactive experience
[dcb name=styling-click-for-experience-text]
Product Features:
- Safety Factors: SFy=3 and SFu=5
- Rated Load Capacity: Simultaneous 2,500 lbs. (1,134 kg.) vertical load and 1,250 lb (567 kg.) side load in any direction.
- Operating Temperature: +32° to +104°F (0 to +40 °C). Contact Flotron for special applications with extended operating temperatures.
- Hand Crank: 8″ long removable crank to reveal a 3/8″ square drive input. When the handle is removed, the jack can be raised/lowered with a standard hand drill (300 rpm max non-impact)
- Input Clutch: Pre-set at Flotron to prevent damage to the jack at the end of travel.
- Turns per inch lift: 20 turns of handle per inch lift of jack.
- Materials: Steel and aluminum construction. Stainless steel fasteners. Bronze nut.
- Finish: Steel and Aluminum parts nickel plated. Caster body powder coated with zinc plated hardware. For additional caster finish options, click here
- Lubricants: Synco super lube grease standard on screw threads. General purpose bearing grease standard in caster swivel bearing. All other bearings or gears are either self-lubricating or sealed. For additional lubricant options, click here
All data presented is based on no modifications to the product.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Jack – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
LJ-8500 Data Sheet
The Model LJ-8500 shown below is typical and representative of the LJ-8500 Models. For more information on specifying a jack, see the JACK OPTIONS page and JACK CREATING A MODEL NUMBER pdf.
Click on Leveling Jack image for an Interactive experience
[dcb name=styling-click-for-experience-text]
Product Features:
- Safety Factors: SFy=3 and SFu=5
- Rated Load Capacity: Simultaneous 8,500 lbs. (3,855 kg.) vertical load and 4,250 lb (1,928 kg.) side load in any direction.
- Operating Temperature: +32° to +104°F (0 to +40 °C). Contact Flotron for special applications with extended operating temperatures.
- Hand Crank: 12″ long removable crank to reveal a 1/2″ square drive input. When the handle is removed, the jack can be raised/lowered with a standard hand drill (300 rpm max non-impact)
- Input Clutch: Pre-set at Flotron to prevent damage to the jack at the end of travel.
- Turns per inch lift: 50 turns of handle per inch lift of jack.
- Materials: Steel and aluminum construction. Stainless steel fasteners. Bronze nut.
- Finish: Steel and Aluminum parts nickel plated.
- Lubricants: Synco super lube grease standard on screw threads. All other bearings or gears are either self-lubricating or sealed. For additional lubricant options, click here
- Leveling Foot: Leveling foot with rubber pad on bottom of jack ram for severely uneven floors. Leveling foot accommodates 1.75° floor deviation per jack.
All data presented is based on no modifications to the product.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Jack – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
LJ-4500 Data Sheet
The Model LJ-4500 shown below is typical and representative of the LJ-4500 Models. For more information on specifying a jack, see the JACK OPTIONS page and JACK CREATING A MODEL NUMBER pdf.
Click on Leveling Jack image for an Interactive experience
[dcb name=styling-click-for-experience-text]
Product Features:
- Safety Factors: SFy=3 and SFu=5
- Rated Load Capacity: Simultaneous 4,500 lbs. (2,041 kg.) vertical load and 2,250 lb (1,020 kg.) side load in any direction.
- Operating Temperature: +32° to +104°F (0 to +40 °C). Contact Flotron for special applications with extended operating temperatures.
- Hand Crank: 10″ long removable crank to reveal a 3/8″ square drive input. When the handle is removed, the jack can be raised/lowered with a standard hand drill (300 rpm max non-impact). For hand crank orientation options click here
- Input Clutch: Pre-set at Flotron to prevent damage to the jack at the end of travel.
- Turns per inch lift: 20 turns of handle per inch lift of jack.
- Materials: Steel and aluminum construction. Stainless steel fasteners. Bronze nut.
- Finish: Steel and Aluminum parts nickel plated.
- Lubricants: Synco super lube grease standard on screw threads. All other bearings or gears are either self-lubricating or sealed. For additional lubricant options, click here
- Leveling Foot: The standard jack has a rubber pad on bottom of jack ram to accommodate 0.50° max floor deviation per jack. For additional leveling foot options for severely uneven floors, click here.
All data presented is based on no modifications to the product.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Jack – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
LJ-3750 Data Sheet
The Model LJ-3750 shown below is typical and representative of the LJ-3750 Models. For more information on specifying a jack, see the JACK OPTIONS page and JACK CREATING A MODEL NUMBER pdf.
Click on Leveling Jack image for an Interactive experience
[dcb name=styling-click-for-experience-text]
Product Features:
- Safety Factors: SFy=3 and SFu=5
- Rated Load Capacity: Simultaneous 3,750 lbs. (1,701 kg.) vertical load and 1,875 lb (850 kg.) side load in any direction.
- Operating Temperature: +32° to +104°F (0 to +40 °C). Contact Flotron for special applications with extended operating temperatures.
- Hand Crank: 8″ long removable crank to reveal a 3/8″ square drive input. When the handle is removed, the jack can be raised/lowered with a standard hand drill (300 rpm max non-impact). For hand crank orientation options click here
- Input Clutch: Pre-set at Flotron to prevent damage to the jack at the end of travel.
- Turns per inch lift: 20 turns of handle per inch lift of jack
- Materials: Steel and aluminum construction. Stainless steel fasteners. Bronze nut.
- Finish: Steel and aluminum parts nickel plated.
- Lubricants: Synco super lube grease standard on screw threads. All other bearings or gears are either self-lubricating or sealed. For additional lubricant options, click here
- Leveling Feet: The standard jack has a rubber pad on bottom of jack ram to accommodate 0.50° max floor deviation per jack. For additional leveling foot options for severely uneven floors, click here.
All data presented is based on no modifications to the product.
As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.
For Jack – Creating a Model Number pdf click here.
For clarification of terms or phrases, please see the Holding Fixtures Definitions page.
